AJI Heavy Equipment Rental LLC (AJI Rentals) introduced the Jekko SPX1280 mini crane this year to the Middle East, with the first machine arriving in the UAE. AJI Rentals is the official dealer of all Jekko’s products in the region.
As a related business of ALEC Engineering and Contracting L.L.C, AJI Rentals offers equipment such as access platforms, mini cranes, cleaning equipment, and material handling equipment, for hire, with or without operators.
AJI Rentals has included the entire Jekko range to its growing rental fleet. Jekko’s mini crane products provide the mini crane segment and market with endless possibilities. The SPX1280 encompasses new-generation technology that fully exploits the concepts of stability and hoisting. It results in straightforwardness and versatility for the operators to enjoy a new working experience and endless operating configurations, pushing to the extremes the concept of performance.
“The SPX1280 has a very user-friendly user interface, allowing full control of all cranes, Jib and tool functions, through one easy to use control box, it is an exciting piece of equipment and will be a welcome addition to our rental fleet,” says Dean Jones, General Manager, AJI Rentals. “With a lift capacity of 8 tons, a 2 ton pick and carry capability, a maximum lift height of 26.6m with the hydraulic jib installed, removable counterweight and a footprint up to 50% smaller than its competitors it offers massive advantages and without a doubt is the top machine in its sector.”
Endless operating configurations
The governing technology of the new SPX1280 offers an entirely new approach for the operator to manage different working situations. In the past, the configurations that allowed to reach the stability required were extremely limited and affected the work dynamics; nowadays, the combination of the stabilization system, sensor technology, software, and a new user interface generates endless working situations. The core of this crane is its new stabilization system that makes the machine adapt to any working environment and the well-known hydraulic jib with three extensions that can be stowed either under or on the side of the main boom.
New stabilization system
The stabilization system of the SPX1280 considers several factors to determine the possible working conditions. Depending on the opening angle and the extension of the outriggers, as well as the potential use of the counterweight, the machine software can define in real-time, the capacity in a specific point. In the past, this wasn’t possible to such an extent since partial extensions of the outriggers, and 0° to 45° intermediate angles could not be considered. The stabilization degrees have increased from four to seven and their displaying on the interface is more accessible and user-friendly.
An advanced and precise hydraulic system
With a new hydraulic system, this crane has a smoother and more precise operation, which increases the operator’s feeling of control. This 100% electronically operated supply system has been enhanced to offer new functions such as jib extension and boom lifting at the same time, smoother and more performing tracks, operation while combining four functions at a time.
Reduced consumption, higher performance
The SPX1280 features a 19kW Diesel engine fitted with a variable displacement pump that increases the efficiency of the whole unit while fully exploiting the engine power depending on the operation underway. This means better performance and reliability, as well as considerable fuel reduction. The new engine (Stage V, Tier 4 Final) complies with the 2019 EU emission standards.
Everything in the operator’s hands
The SPX1280 is operated via a new user-friendly radio remote control designed by Jekko’s in-house team. Five configurations are possible: Pick & Carry, crane, stabilizers, crosspieces, and travel. A single radio remote control starts, configures and operates the machine and its tools: no more on-board controls, it’s everything in the operator’s hands.
Competitive edge
In a continuously developing market of lifting equipment, the new SPX1280 is a significant evolution and sets the bar higher for what concerns technological innovation.
Similar to its predecessor, the SPX 1280 is ideal for use in steel construction, industrial maintenance and installations and the glazing and glass sector and its versatility can be better appreciated when lifting activities are carried out in confined areas. “Mini cranes need to be able to not only access confined areas, but also need to be able to operate and lift in confined areas, the advantages of the advanced programs and smaller outrigger footprints really show here,” explains Jones.
Technical characteristics of the Jekko SPX1280
• Pick and carry capacity: 2000kg
• Dimensions: 5730 x 1450 x 2040 mm
• Stability area: 4600 x 4600 mm
• Max SWL: 8000 kg
• Weight: 7000 kg (optional tools excluded) + 1500 kg counterweight
• Engine: Diesel D1105-E4B + single- or three-phase motor
• Max height (with hydraulic jib and three extensions): 26.6 m
• Max reach (with hydraulic jib and three extensions): 20 m
• Rotation: 360° continuous